{"id":6687,"date":"2023-02-10T13:13:08","date_gmt":"2023-02-10T13:13:08","guid":{"rendered":"https:\/\/polymer.bas.bg\/?page_id=6687"},"modified":"2026-01-30T15:02:54","modified_gmt":"2026-01-30T15:02:54","slug":"equipment","status":"publish","type":"page","link":"https:\/\/polymer.bas.bg\/en\/equipment\/","title":{"rendered":"Equipment"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The Institute of Polymers is a member of the consortium National Scientific Infrastructure INFRAMAT\n<\/a><\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0Nanoparticle Tracking Analysis instrument<\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired with funding from project INFRAMAT<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Nanoparticle Tracking Analysis is a technique that by capturing the light scattered from particles undergoing Brownian Motion provides tracking of their size and concentration data. A high sensitive sCMOS camera allows for real-time particle monitoring. The device operates in flow mode<\/span> using a set of lasers emitting light in the following spectral regions – violet (405 nm, <70mW), blue (488 nm, <55mW), green (532 nm, <60mW) and red (642 nm, <50mW). An additional fluorescent filter allows for the detection of labeled particles. The device can determine the size (diameter) of particles by number in the range from 10 nm to 1000 nm and a concentration from 10<\/span>6<\/span><\/sup> to 10<\/span>9 <\/span><\/sup>particles\/ml. The system allows for precise temperature control during measurements in the range 5 to 70 \u00b0C.<\/span><\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0 \u00a0 Atomic Force Microscope BRUKER DIMENSION ICON with ScanAsyst\u00ae<\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001 <\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2022 Atomic Force Microscope (AFM) system Dimension Icon from Bruker Nanosurface Division is equipped with a NanoScope V Control Station operating in a ScanAsyst Mode and using Peak Force Tapping technology. It offers surface images with resolution up to 5k x 5k, includes a scanning probe microscope (SPM) Scan Head with a XY nominal range of 90 x 90 microns and Z range of 10 microns. The microscope performs imaging techniques on samples up to 210 mm in diameter and 15 mm thickness.<\/p>

\u2022 AFM system performs all major SPM techniques on various sample surfaces in air or liquid medium, in the temperature range -30 to 60 \u00b0C, including:
– ScanAsyst Mode (air and liquid);
– Tapping Mode (air and liquid) and Contact Mode;
– Lateral Force Microscopy;
– Phase Imaging;
– Force Spectroscopy;
– Force Modulation (air and liquid);
– Electric Field Microscopy (EFM);
– Surface Potential Microscopy or Kelvin Force Microscopy;
– Magnetic Force Microscopy (MFM);
– Piezoresponse Force Microscopy (PFM);
– Conductive Mode \u0410FM;
– Scanning Capacitance Microscopy (SCM);
– Peak Force QNM and Peak Force TUNA Mode<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
             Differential scanning calorimeter Perkin Elmer DSC-8500<\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project UNION (\u0414\u041e 02\/2\/2009)<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Differential scanning calorimeter Perkin Elmer DSC-8500, equipped with a cooler Intracooler 3 to ensure the operation in the chambers of the calorimeter from 130 \u043e\u0421 to 900 \u043e\u0421 in non-isothermal and isothermal mode with rate of heating and cooling of 0.1 to 200 \u00b0 C\/min.<\/p>\n


\u2022 Determination of melting, crystallization, glass transition temperature, etc. Identification of high and low high molecular weight organic and inorganic compounds, (co)polymers, blends and composites. Investigation of powders, granules, foils, membranes, fibers and others. Determination heat (enthalpies) of transition (melting, crystallization, polymorphic-unit phase transitions, chemical reactions, polymerization, vulcanization, and other types of cross-linking). Determination of the specific heat at constant pressure, substance purity, degree of crystallinity, etc.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Mechanical testing equipment for materials and nanomaterials INSTRON 3344<\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

A single column system for mechanical testing of materials and nanomaterials – INSTRON 3344. The testing machine has two load cells with capacity of 50 N and 2 kN, screw action grips, pneumatic side-action grips and jaws with rubber face.
The machine is equipped with a compressor model Einhell, manual press model DVT NP, samples punch DVT NK K, and specialized software Bluehill.<\/p>\n

The machine is able to determine the mechanical characteristics of polymeric materials and nanomaterials (nanofibrous and nonwoven materials, gels and films). The equipment allows to determine: tensile strength, compressive and bending strength; Young`s modulus and modulus of deformation; maximum elongation at break.
The relationship between the stress and strain (stress\u2013strain curve) can be plotted and statistical analysis of the obtained results can be performed.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Gas Chromatograph with Flame-Ionization Detector<\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u00a0 Gas Chromatograph Agilent 7890B with capillary inlet for liquid samples with controlled flow split. Separation occurs in the gas phase in controlled nitrogen flow. The equipment has a flame-ionization detector and an Agilent 7693A automatic liquid sampler. The gas chromatograph is supplied with three columns with different polarity and Clarity software for control, data acquisition and data processing.<\/p>\n


\u00a0 The equipment is suitable for analysis of solvent and monomer purity, control of monomer content in polymers or reaction mixtures; qualitative analysis via retention time with standard substances; quantitative analysis by external standards, internal standard or standard addition.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Nexera XR Ultra High Performance Liquid and Gel Permeation Chromatograph<\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u00a0Nexera XR Ultra High Performance Liquid Chromatograph, consisting of a quaternary pump, degasser, automatic injector, a column heater, provided with UV\/Vis (SPD-20A) and differential refractive index (RID-20A) detectors. The separation is performed with a column for liquid (RESTEK Pinacle DB C18) or set for gel permeation (Agilent pLgel SEC\/GPC) chromatography. Data acquisition and processing is performed with a LabSolutions LC\/GPC software.<\/p>\n

\u2022 HPLC and gel permeation chromatography (HPLC \/ GPC) system finds the following applications:
– Quantitative analysis of the organic compounds in solution. It can be used in isocratic or gradient mode by mixing of up to four solvents.
– The equipment is designed to analyze synthetic oligomers, homo- and copolymers, as well as modified natural polymers and to determine their composition and molecular weight characteristics: molecular weight and molecular weight distribution.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 TENSIOMETER KR\u00dcSS K100<\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u00a0 The Force Tensiometer K100 of KR\u00dcSS performs high-precision, automatic and reliable measurements of:
– surface tension and interfacial tension in the range from 1 to 2000 mN\/m,
– dynamic contact angle measurements in the range from 0 to 180\u00b0.
The tensiometer is equipped with an optical zeta-sensor providing absolute measurement in the vertical position and built-in ionizer ensures highest degree of accuracy and eliminates any electrostatic charges. The system has a built-in thermometer and thermostated jacket for sample vessel and an integrated magnetic stirrer for optimal homogenization of the medium.
\u00a0 The system enables the automatic measurement of surface tension of liquids (including polymer solutions in various solvents) by the Wilhelmy platinum plate method and by the Du Noi platinum-iridium ring method, as well as measurement of interfacial tension between two liquids. The dynamic contact angle of rectangular, round and cylindrical samples and advancing and receding contact angle by the Wilhelmy plate method can be determined. Additional sample holder ensures measuring the adsorption and wetting behaviors of powder samples by the Washburn method. Wetting behavior of tablets, pharmaceutical active ingredients and excipients, foils, films, fiber bundles and textiles can also be measured.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Potenciostat\/Galvanostat model PGSTAT204FRA32M AutoLab\u00ae with a Fumatech\u00ae MK3 measurement cell<\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u00a0 Potenciostat\/Galvanostat model PGSTAT204FRA32M AutoLab\u00ae with option to perform impedance spectroscopy measurements. The equipment include a module for temperature and humidity control with special measurement cell model Fumatech\u00ae MK3. The measurement cell works in the temperature range 20-200\u00b0\u0421 and relative humidity up to 100%.<\/p>\n

\u00a0 The integrated system gives opportunity for precise measurement and determination of the electron- and ion conductivity of polymer materials (e.g. proton- and OH- conductive membranes for fuel cells, electron conductive surfaces and composite materials etc.), as well determination of the dielectric properties of electro insulating plastic materials. The conduct measurements could be performed at a wide temperature and relative humidity ranges with using minimal test sample size. The used platinum electrodes and the constructive Teflon coating material of the measurement cell gives the opportunity for testing of chemically aggressive polymer electrolyte materials and composites.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 INSTRON CEAST MF20 melt flow tester<\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

INSTRON CEAST MF20 melt flow tester equipped with a melt cutting device of extrudate, a high-resolution digital encoder and a standard set of 8 test masses ranging from 0.325 kg (piston mass) up to 15 kg for testing a wide spectrum of materials. The instrument operates in the temperature range 50 to 450\u00b0\u0421.<\/p>\n


The melt flow tester measures the melt flow rate (MFR) and the melt volume rate (MVR) of polymers and polymer composites according ISO 1133, ASTM D1238 or equivalent (Procedures A, B, C).<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u0422he HAAKE MiniLab II Micro twin-screw compounde <\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u00a0\u2022 \u0422he HAAKE MiniLab II Micro is based on a conical, twin-screw compounder ( L= 11.5 cm); with an integrated backflow channel; motor power 400W;max. speed max. 360 rpm; max. torque 5 Nm \/ screw; air pressure up to 200 bar; two integrated pressure transducers; two heating zones whit temperatures up to 350\u00b0C; extrusion of a small amount of polymer material (5 g .\u2264 m \u2264 10 g); manual and pneumatic feeding. The system is equipped with co- and counter-rotating twin screws; with an inert gas flush system; 5 extrusion dies ( diameter 0.5 mm, 1 mm, 1.5 mm and 2.0 mm, respectively; flat with a hole with dimensions 5 mm x 0.5 mm). Manual or computer control.
\u2022 The micro compounder is designed for mixing and rheological measurements of small volume of polymeric materials; precisely controlled reactive extrusion of high viscous melts; for nano-composites, bio-polymers; testing of expensive additives; developing of new formulations. Two pressure transducers are integrated in the backflow channel. They allow the measurement of (relative) melt viscosity (counter-rotating screws required). Manual and computer control by specialized software Haake PolySoft allows monitoring, collection, storage and processing of data.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Hydraulic laboratory press for preparation of standard samples<\/h5>\n
<\/a><\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2022 The hydraulic laboratory press has two operating plates, that allow heating at 50 to 3000C with accuracy of \u00b1 2 0C. Workload \u2013 up to 35 tons.
\u2022 The press is equipped with two knives for preparation of standard sample bodies of pressed materials – ISO 527-2 (test body type 1A) and ISO 179 (test body type 1 without thread).<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Equipment for spray drying of the aqueous and organic solutions<\/h5>\n
<\/a><\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Mini Spray Dryer \u0412-290 \u0410dvance with module for organic solvents, model Inert Loop B-295, BUCHI.
The equipment is suitable for use both aqueous solutions and 100% organic solvents. The flow capacity of aspiration module is 35 m3\/h. The equipment is able to control the flow of the spray gas. Dosing is by peristaltic pump with flow rate 28 ml\/min and with the possibility of the simultaneous supply of more than one fluid.
Module Inert Loop B-295 provides a closed circulation under inert conditions, equipped with sensors for monitoring the levels of oxygen and pressure. Output temperature of the module providing a closed circulation under inert conditions: -20\u00b0 C; Power efficient cooling at -10\u00b0 C is 800W.<\/p>\n

The equipment enables:
– Spray drying of liquid starting materials
– Structural modification
– Drying of suspensions
– Agglomeration
– Crystallization in spray drying
– Technology micro-encapsulation and coating
– Vacuum-drying of powders, granules and similar products.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Combined Thermogravimetric analyzer with Gas Chromatograph and Mass-selective Detector<\/h5>\n
<\/a><\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within project POLINNOVA (FP7 GA 316086)<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u2022 Gas Chromatograph Clarus600 with a mass-selective detector SQ8 – PerkinElmer. The gas chromatograph is equipped with two Valco gas valves, additional membrane vacuum pump for introduction of gas samples and a RedShift control module for gas valves and two additional temperature zones. The valve system is connected via heated transfer line to thermogravimetric analyzer PerkinElmer TGA4000. The equipment is supplied with PYRIS software for thermogravimeter, TurboMass software for mas-selective detector and NIST spectra library.
\u2022 The equipment operates in the following modes:
– Thermogravimeter \u2013 measures mass change in inert gas flow (argon) with controlled temperature elevation.
– Gas chromatograph with mass-selective detector \u2013 for manual injection of liquid samples. Capillary inlet evaporates the mixture of volatile compounds using controlled temperature program and helium flow and the separation in gas phase occurs. Mass-selective detector measures the spectra of separated substances. Qualitative identification of main components and impurities via NIST spectra library.
– Combined TGA\/GC\/MSD \u2013 via gas-sampling valve the gas sample from thermal decomposition by the thermogravimeter is injected, separated and analyzed. Qualitative identification via NIST spectra library.
– TGA\/MSD \u2013 specific ion monitoring from thermal decomposition by the thermogravimeter. Argon flow without gas phase separation. Quantitative measuring of degradation products.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Metrohm automated titration system<\/h5>\n
<\/a><\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Automated titration system (Metrohm AG) is outfitted with:
\u2022 Titrando 907 titrator;
\u2022 Dosino 800 dosing unit;
\u2022 Ti 803 stand for volumetric Karl Fisher water content determination.
\u2022 tiamotm software for complete system management, data storage and processing.
The system is equipped with:
\u2022 Unitrode easyClean Pt1000 eElectrode for aqueous acid-base titrations with function for easy cleaning of the membrane and integrated reference electrode LL Ag\/AgCl; pH range: 0\u00f714, temperature range 0\u00b0 C to 100 \u00b0C.
\u2022 Solvotrode easyClean electrode of non-aqueous acid-base titration with a function for easy cleaning of the membrane, pH range: 0\u00f714, temperature range 0\u00b0C to 70 \u00b0C.
\u2022 Ag Titrode electrode for determining chloride; measuring range: \u22641.10-6 to 1 mol\/L; reproducibility of measurement: \u2264 \u00b1 2%; temperature range 0\u00b0C to 80\u00b0C.
\u2022 Temperature sensor Pt1000, temperature range -50\u00b0C to + 180\u00b0C.
\u2022 computer and printer
Application: for quantitative determination of content of functional groups (carboxyl, hydroxyl, halides) and water (0.1-100%) in monomers and polymers.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 X-ray diffractometer D8 Advance ECO of Bruker AX<\/h5>\n
<\/a><\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within the Project BG161PO003-1.2.04-0096-C0001<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

D8 Advance ECO, Bruker AXS, X-ray diffractometer is a multifunctional tool for phase and structural analysis of powders, thin films and bulk materials, analysis of liquid samples and reflectometry of thin layers (crystalline, amorphous or liquid samples). The theta-theta vertical diffractometer is equipped with a ceramic Cu X-ray tube with fine long focus and a Lynx-eye position sensitive detector. Two sample stages are installed with the diffractometer – rotation and capillary stages. D8
Advance ECO has the ability to perform a full range of applications, from qualitative and quantitative phase identification, crystal structure solution from powder samples, crystallite size determination, micro strain analysis, residual stress analysis, and preferred orientation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Research Goniometer and Light Scattering System<\/h5>\n
<\/a><\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within project POLINNOVA (FP7 GA 316086)<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n
The system BI-200SM of Brookhaven Instruments allows performing studies of both static light scattering (SLS) and dynamic light scattering (DLS). Within SLS, measurements of scattered light intensity at fixed angles or variable angles over the measurement range from 12 to 155 degrees with a resolution of 0.01 degrees can be carried out. The results from the measurements are interpreted according to the methods of Zimm, Berry, Debye, Guinier, Kratky, etc. Weight average molar mass (Mw), radius of gyration (Rg), and second virial coefficient (A2) of homopolymers, copolymers, and self-assembled structures in solution can be extracted from the data. Within DLS, particles sizes from the lowest nanometer range up to the micrometer range can be calculated via measurements of relaxation time. Relaxation rates, particle sizes, diffusion coefficients, particle size distributions of polymers in solution, colloidal systems, self-assembled and co-assembled structures can be determined.
The system is composed of a 30 mW, 633 nm HeNe laser, a thermostated sample chamber with a vat, containing an index-matching fluid, a continuously working filtration unit, and an avalanche photo diode detector, installed on a rotating arm. <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Dynamic Mechanical Analyzer (DMA)<\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
The equipment was acquired within project POLINNOVA (FP7 GA 316086) <\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

DMA Q 800 (TA Instruments) is a material characterization tool capable of determining the viscoelastic properties of
material as a function of temperature (-150\u00b0C to 600\u00b0C) or frequency (0.01Hz to 200Hz). Storage modulus, loss modulus,
glass transition, crystallinity, cross-linking effects, fatigue and other transitions can be determined with DMA.
Modes of DMA and clamping guide for different sample types:
1. Cantilever (Single\/ Dual) \u2013 for general purpose mode:
– Dual cantilever is suitable for highly damped materials and to study cure of supported materials.
– Single cantilever is useful for most neat thermoplastics and stiffer materials.
2. Three-point bending – for medium to high modulus materials.
3. Compression – for low to medium modulus materials.
4. Shear sandwich – provides shear moduli: G*, G\u2019, G\u201d and G(t). For testing highly damped soft solids. shear moduli
5. Tension – for thin films and fibers with high modulus.
ACS-3 (TA Instruments): Air chiller system for use with the DMA Q800. Gas flow cooling system is equipped with a
three-stage cascading compressor design, enabling testing to temperatures as low as -100\u00b0C. <\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u0415quipment for determining the molecular mass characteristics of polymers<\/h5>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t